Langsung ke konten utama

Setting IP Address in Windows 11

 How to Set IP Address in Windows 11

How to Set IP Address in Windows 11

Setting up the IP address in Windows 11 is a straightforward process that allows you to connect to a local network and access the internet. In this article, we will guide you on how to set up your IP address on Windows 11.


Step 1: Open Network Settings

The first step is to open the network settings by clicking on the network icon in the taskbar. Then, click on the "Network & Internet settings" option.


Step 2: Open Network and Sharing Center

In the Network & Internet settings, click on the "Change adapter options" link. This will open the Network and Sharing Center.


Step 3: Open Properties of Network Adapter

In the Network and Sharing Center, right-click on the network adapter that you want to set the IP address for and select "Properties".


Step 4: Select Internet Protocol Version 4 (TCP/IPv4)

In the Properties window, scroll down and select "Internet Protocol Version 4 (TCP/IPv4)" and click on the "Properties" button.


Step 5: Manually Set IP Address

In the Internet Protocol Version 4 (TCP/IPv4) Properties window, select the "Use the following IP address" option. Enter the IP address, Subnet mask, Default gateway, and DNS server addresses provided by your network administrator.


Step 6: Save Changes

Click on the "OK" button to save the changes. If you want to set up an IPv6 address, select "Internet Protocol Version 6 (TCP/IPv6)" and follow the same steps.


Step 7: Verify IP Address Settings

To verify that your IP address has been set correctly, open the Command Prompt and type "ipconfig" and press Enter. The Command Prompt will display your IP address, subnet mask, default gateway, and DNS server addresses.


In conclusion, setting up an IP address in Windows 11 is a straightforward process that can be done in a few steps. By following the steps outlined in this article, you will be able to set up your IP address and connect to your local network and the internet.

Label:

Komentar

Posting Komentar

Postingan populer dari blog ini

How to Set IP Address in Cisco Packet Tracer

 How to Set IP Address in Cisco Packet Tracer Introduction: In networking, IP addresses are crucial for identifying devices and allowing communication between them. Cisco Packet Tracer is a powerful tool for simulating network environments, and understanding how to set IP addresses in this software is essential for anyone working in networking. In this article, we will guide you through the process of setting IP addresses in Cisco Packet Tracer. Step 1: Add Devices to the Network Topology First, you need to add devices to the network topology in Cisco Packet Tracer. This can be done by selecting the appropriate devices from the device list and dragging them onto the work area. Once you have added the devices, you need to connect them with the appropriate cables. Step 2: Access the Device Configuration To set the IP address of a device, you need to access its configuration page. To do this, select the device in the network topology and click on the "Config" button on the botto...
Posting Komentar
Baca selengkapnya

Setting IP in Windows 10

 How to Set IP Address in Windows 10: Step-by-Step Guide Configuring the IP address of your Windows 10 computer can help you troubleshoot network issues, connect to a specific network, or allow remote access. In this article, we'll guide you through the process of setting an IP address in Windows 10. Step 1: Open Network and Sharing Center To begin, click on the Windows icon in the bottom-left corner of your screen and select "Settings" (gear icon). From there, choose "Network & Internet" and then "Status." Under "Change your network settings," select "Change adapter options." This will open the Network and Sharing Center. Step 2: Select the network connection In the Network and Sharing Center, locate the network connection you want to set an IP address for. It could be an Ethernet or Wi-Fi connection. Right-click on it and select "Properties" from the context menu. Step 3: Choose TCP/IPv4 In the properties window, sel...
Posting Komentar
Baca selengkapnya